Roofing

Eaves Protection Tray 1.5m provides additional support for roofing underlay at the eaves, helping direct rainwater safely into the gutter and protecting the roof edge from moisture damage. Suitable for pitched roof installations, it provides a durable solution for new build, refurbishment and roof repair projects.

Evo-Stik Flashband Primer SV Black 1L is a fast-drying, solvent-based bitumen primer designed to improve adhesion before applying Flashband self-adhesive flashing tape. Ideal for preparing porous, rough or dusty surfaces, including brickwork, concrete, timber and roofing materials. Suitable for roofing repairs, flashing installations and weatherproofing projects.

Evo-Stik Flashband Primer SV 500ml is a fast-drying, solvent-based bitumen primer designed to improve adhesion before applying Flashband self-adhesive flashing tape. Ideal for preparing porous, rough or dusty surfaces, including roofing materials, brickwork, concrete and timber. Suitable for roofing repairs and weatherproofing projects in cold or damp conditions.

Flashband is a high-performance self-adhesive flashing tape designed to create an immediate, long-lasting watertight seal. Easy to apply with simple hand pressure, it requires no specialist tools for cutting, shaping, or installation. Suitable for use on a wide range of building materials, Flashband adheres securely to brick, masonry, slate, concrete roof tiles, timber, metal, roofing felt, glass, rigid plastics, terracotta tiles, and more.

FLEX-R ClassicBond 50mm Steel Hand Roller is designed for applying firm, even pressure to compatible EPDM roofing seams, tapes and flashing details. The 50mm steel roller helps achieve consistent contact between pressure-sensitive roofing accessories and prepared membrane surfaces during installation.

FLEX-R ClassicBond Carlisle Lap Sealant is designed for sealing specified joints and detailing areas within compatible EPDM rubber roofing systems. Applied using a suitable sealant gun, it provides a protective seal at approved roofing details. Each tube covers approximately 6 linear metres, depending on the bead size and application.

FLEX-R ClassicBond Angled Roof Drain measuring 100 x 100 x 500mm is designed to provide a drainage outlet for compatible EPDM flat roofing systems. Its angled configuration allows rainwater to be directed through a suitable roof edge or parapet outlet arrangement, helping manage surface water as part of a correctly designed roof drainage system.

FLEX-R ClassicBond Bonding Adhesive 5L is designed for bonding compatible EPDM rubber roofing membranes to suitable roofing substrates. Used for perimeter details, upstands and vertical surfaces as part of the ClassicBond roofing system, it provides a strong adhesive bond when applied according to the manufacturer's instructions.

FLEX-R ClassicBond 40mm Black Perimeter Fasteners are designed for securing compatible roof edge trims and perimeter components as part of the ClassicBond EPDM roofing system. Supplied in a bag of 100, these fasteners are suitable for specified flat roof edge installations and replacement work.

FLEX-R ClassicBond Large PS Pipe Seal is designed to provide a watertight flashing around compatible pipe penetrations through EPDM flat roofing membranes. Suitable for pipe diameters from 25mm to 152mm, the pressure-sensitive seal is used with the appropriate EPDM primer as part of the ClassicBond roofing system.

FLEX-R ClassicBond 150mm PS RUSS Tape is a reinforced, pressure-sensitive securement strip designed for specified EPDM roofing membrane details. Used as part of the ClassicBond roofing system, it helps secure the membrane at designated fixing points, including compatible perimeter and upstand transitions. Supplied in a 30.5m roll.

FLEX-R ClassicBond 50mm Seam Fastening Plates are designed for mechanically securing compatible EPDM roofing membranes and reinforced securement strips as part of the ClassicBond roofing system. Measuring 50mm (2 inches) in diameter, they distribute fixing pressure across the secured material. Supplied in a box of 100 plates.

FLEX-R ClassicBond 150mm EPDM Seam Tape is a pressure-sensitive tape designed for joining compatible EPDM rubber roofing membranes. Supplied in a 30.5m roll, it provides a wider bonding strip for specified roofing seams and is used with the appropriate EPDM primer as part of the ClassicBond flat roofing system.

FLEX-R ClassicBond 75mm EPDM Seam Tape is a pressure-sensitive tape designed for joining compatible EPDM rubber roofing membranes. Supplied in a 30.5m roll, it is used with the appropriate EPDM primer to form secure, watertight seams as part of the ClassicBond flat roofing system.

FLEX-R ClassicBond Sprayable Bonding Adhesive is a 500ml aerosol adhesive designed for bonding compatible EPDM rubber roofing membranes to suitable substrates. Its spray application makes it a convenient option for smaller roofing areas, perimeter details and repairs where the manufacturer specifies this adhesive.

FLEX-R ClassicBond 225mm Uncured Flashing Tape is a pressure-sensitive EPDM flashing material designed for waterproof detailing around compatible flat roof penetrations, corners and irregular shapes. Its uncured construction allows it to be moulded around complex roofing details before curing in place. Supplied in a 15.25m roll for use with the appropriate ClassicBond EPDM primer.

FLEX-R ClassicBond Leaf Grate is designed for use with compatible angled flat roof drains. It helps prevent leaves and larger debris from entering the drainage outlet, reducing the risk of blockages and allowing rainwater to flow through the roof drainage system.

FLEX-R ClassicBond Leaf Grate is designed for use with compatible anti-backup flat roof drains. It helps prevent leaves and larger debris from entering the drainage outlet, reducing the risk of blockages and helping maintain rainwater flow. Suitable for compatible ClassicBond EPDM roofing drainage installations.

FLEX-R ClassicBond Plastisol Metal Wall Trim in black is designed for finishing compatible EPDM flat roofing where the membrane meets an adjoining wall. Measuring 3m long with a 25 x 100mm profile, the plastisol-coated metal trim provides a neat finish to wall abutments and roofing details.

FLEX-R ClassicBond SureEdge 2 Part Drip Trim in black is designed to finish the drainage edge of compatible EPDM flat roofs. Supplied with a standard backplate, the two-part trim system helps secure the roofing membrane at the perimeter while directing rainwater towards the guttering.